1156 LAMP REPLACEMENT (RED)

1156 Lamp Replacement (Red), retail ~$7.00 (www.ledlight.com...*)
Manufactured by (Unknown)
Last updated 05-13-10




This is a retrofit lamp specifically designed for replacing the incandescent 1156 12 volt incandescent lamp in automobiles where a red lamp would normally be.

It uses a tightly-packed array of 19 5mm red LEDs, has a bayonet socket, and is designed to be operated from any common +12 volt negative ground vehicular electrical system.

* This URL is to a retailer of a similar product, not this particular one.


Size of product w/hand to show scale SIZE



To use this lamp, just remove the incandescent 1156 bulb you want to switch out, and replace it with this.

Place the old bulb somewhere safe in case you need to use it for something else -- or just stomp on it if you like to hear light bulbs pop.



This product obtains all of the power it requires from your vehicle's electrical system, not batteries, so I do not need to tell you to remove something, carry it to a bridge over deep water (the Oakland Bay Bridge would be ideal; however, the Juneau-Douglas Bridge would also do in a pinch here), and throw it over the side so that it goes "blub blub blub" all the way to the bottom of Gastineau Channel with all of the bowling balls that were lobbed over that bridge in the 1950s and 1960s and then rather emphatically shout, "O WAIT!!! THAT'S THE GOOD PART!!!"


This is what the Juneau-Douglas Bridge looks like...or what it lookED like anyway before it was replaced in 1976.


And this is what the bridge looks like now.


Current usage measures 110.60mA on my DMM's 400mA scale.



The 1156 Lamp Replacement is meant to be used as a retrofit bulb in a vehicle, not as a flashlight meant to be carried around, thrashed, and abused; so I won't try to drown it in the toliet tank, bash it against a steel rod or against the concrete floor of a front porch, let my mother's big dog's ghost or my sister's kitty cats spring a leak (uranate) on it, run over it with a 450lb Celebrity motorised wheelchair, stomp on it, use a medium or large ball peen hammer in order to bash it open to check it for candiosity, fire it from the cannoņata, drop it down the top of Mt. Erupto (I guess I've been watching the TV program "Viva Piņata" too much again - candiosity is usually checked with a laser-type device on a platform with a large readout (located at Piņata Central {aka. "Party Central"}), with a handheld wand that Langston Lickatoad uses, or with a pack-of-cards-sized device that Fergy Fudgehog uses; the cannoņata (also located at Piņata Central) is only used to shoot piņatas to piņata parties away from picturesque Piņata Island, and Mt. Erupto is an active volcano on Piņata Island), send it to the Daystrom Institute for additional analysis, or perform other indecencies on it that a flashlight might have to have performed on it. So this section of the web page will be ***SIGNIFICANTLY*** more bare than this section of the web page on a page about a flashlight.

This single-contact bulb is most frequently used in turn signals.
Since I do not have a socket that this bulb fits in, long-term testing simply cannot be done.

***VERY, SUPER DUPER, CRITICALLY IMPORTANT!!!***
You must check with the United States DOT (Department Of Transportation) regulations regarding installing these into any street-legal vehicle such as most cars & trucks, many motorcycles, and some scooters before driving that vehicle after equipping it with these bulbs!!!



Beam photograph on the test target at 12".
Measures 72,800mcd on a Meterman LM631 (now Amprobe LM631A) light meter.



Beam photograph on a wall at ~10 feet.

Those colored graphics toward the left are my "Viva Piņata" posters, and that clock on the right that looks like a gigantic wristwatch is my Infinity Optics Clock, and that airplane you see is my Cessna 182 R/C Airplane.
You may also be able to see two of my SpongeBob SquarePants plush (Squidward Tentacles & Patrick Star) and a Digimon plush (Greymon)


Spectrographic analysis
Spectrographic analysis of the LEDs in this blub.
USB2000 spectrometer graciously donated by P.L.


ProMetric analysis
Beam cross-sectional analysis.
Image made using the ProMetric System by Radiant Imaging.






TEST NOTES:
Test unit of this plus an 1157 bulb (also with red LEDs) was sent by a (now-unknown) retailer in mid-March 2006, and was received on 03-29-06. These bulbs took so long to be put on this website because the bulbs became lost shortly after receipt; they turned up not long ago (approximately 05-09-20 {or "09 May 2010" if you prefer}).


UPDATE: 00-00-00



PROS:
Uses LEDs that do not unexpectedly blow up like an incandescent
Color purity maintained even if the lens is broken
Lower power consumption than the bulb that it replaces


CONS:
May not be as bright as the lamp it replaces -- I have no way to verify this however


    MANUFACTURER: Unknown
    PRODUCT TYPE: Replacement for 1156 bulb
    LAMP TYPE: 5mm red LED
    No. OF LAMPS: 19
    BEAM TYPE: Medium spot w/softer corona
    SWITCH TYPE: N/A
    CASE MATERIAL: Metal
    BEZEL: N/A
    BATTERY: N/A
    CURRENT CONSUMPTION: 110.60mA
    WATER- AND URANATION-RESISTANT: Very light splatter-resistant at maximum
    SUBMERSIBLE: No
    ACCESSORIES: None
    SIZE:
    WEIGHT:
    COUNTRY OF MANUFACTURE: Unknown
    WARRANTY: Unknown/TBA

    PRODUCT RATING:

    Star Rating





1156 Lamp Replacement (Red) *






Do you manufacture or sell an LED flashlight, task light, utility light, or module of some kind? Want to see it tested by a real person, under real working conditions? Do you then want to see how your light did? If you have a sample available for this type of real-world, real-time testing, please contact me at ledmuseum@gmail.com.

Please visit this web page for contact information.

Unsolicited flashlights, LEDs, and other products appearing in the mail are welcome, and it will automatically be assumed that you sent it in order to have it tested and evaluated for this site.
Be sure to include contact info or your company website's URL so visitors here will know where to purchase your product.








This page is a frame from a website.
If you arrived on this page through an outside link,you can get the "full meal deal" by clicking here.