This product does not emit light of its own, so the standard review format will not be used and the product will not be assigned a rating
This is the Value Tool Set, consisting of a 6 foot tape measure, a type of carpet knife with a long "break-away" blade that gives you a fresh blade when the one you've been using goes to pot, and a set of six jewleller's screwdrivers in their own plastic case.
SIZE
To use the tape measure, pull the metal tab at the lower left of the product to extend the tape (up to 6 feet {2 meters}), and measure. To lock the tape at the length you pulled out (so it doesn't just retract when you let go of it), slide that black plastic thing on the front of the product's bottom down.
When finished, slide the black plastic thing up, "jiggle" the tape if necessary, and allow the tape to reel itself in and retract into the body of the product courtesy of the spring concealed inside.
To use the knife, slide that black plastic slider on the side of the knife's body toward the "business-end" until the knife blade extends a bit.
Then, hold down the black slider with the thumb of one hand while pulling the back 35% or so of it back toward the rear so that the pieces appear to seperate. This locks the blade, so it doesn't just go back inside the body while you're cutting something.
When finished, press the two pieces of the black slider together, and slide the whole thing toward the rear of the knife's body to retract the blade
To use the screwdrivers, just open the case, pick out the one that looks to be of the correct size, screw or unscrew, put the screwdriver back in the case, and finally {phew!}, close the lid.
The screwdrivers in this set.
Spectrographic analysis of the fluorescence of the outer casing of the yellow tape measure from this set when irradiated with the 5mW Violet Laser Module.
TEST NOTES:
Unit was purchased at a Wallgreens store in north Seattle WA. USA sometime between late-2004 and mid-2005.
UPDATE: 00-00-00
MANUFACTURER: Unknown
PRODUCT TYPE: Tool set
LAMP TYPE: N/A
No. OF LAMPS: N/A
BEAM TYPE: N/A
SWITCH TYPE: N/A
CASE MATERIAL: Plastic & metal
BEZEL: N/A
BATTERY: N/A
CURRENT CONSUMPTION: N/A
WATER- AND URANATION-RESISTANT: Yes
SUBMERSIBLE: NO WAY HOZAY!!!
ACCESSORIES: None
COUNTRY OF MANUFACTURE: China
WARRANTY: Unknown/TBA
PRODUCT RATING:
Product is not a light-emitter or test instrument, so the traditional "star" rating will not be used.
Value Tool Set *
Do you manufacture or sell an LED flashlight, task light, utility light, or module of some kind?
Want to see it tested by a real person, under real working conditions? Do you then want to see how your light did? If you have a sample available for this type of
real-world, real-time testing, please contact me at ledmuseum@gmail.com.
Unsolicited flashlights, LEDs, and other products appearing in the mail are welcome, and it will automatically be assumed that you sent it in order to have it tested and evaluated for this site.
Be sure to include contact info or your company website's URL so visitors here will know where to purchase your product.
This page is a frame from a website. If you arrived on this page through an outside link,you can get the "full meal deal" by clicking here.