LEDs - Gallium Indium Nitride UV, violet, purple, blue, aqua, turquoise, green, white. Also Gallium Arsenide and others. New LED MUSEUM! GaN, InGaN, SiC, GaAs, GaP, GaAlP, ZnSe, flashlight, flashlights.

BEST BLINKERS ''HAPPY BIRTHDAY'' LED PIN

Best Blinkers ''Happy Birthay'' Flashing LED Pin, retail $2.99 (www.partycity.com)*
Manufactured by (Unknown) for Best Blinkers (http://bestblinkers.com)
Last updated 01-23-13

The Best Blinkers ''Happy Birthay'' Flashing LED Pin is a nifty little gadget that you pin to clothing that not only looks nice, but it catches the eye with flashing LEDs (seven red and two yellow LEDs that "chase" one another in a circular pattern in this case).

The Best Blinkers ''Happy Birthay'' Flashing LED Pin feeds those LEDs from a pair of CR927 lithium button cells.

* Product was not found on the Party City website, so the URL leads to their "front door".

Size of product w/hand to show scale

SIZE

To use the Best Blinkers ''Happy Birthay'' Flashing LED Pin, you first have to remove the white tab from between the battery compartment and the light itself (you need only do this once). From that point, just give it a gentle but firm clockwise twist. Careful, not TOO hard. Turning it off is just as easy; twist the other way until it goes off.

To pin it to your clothing, remove the black thing from the bottom of the unit. This exposes a pin.
Push the pin through whatever clothing item you want the unit on (be careful not to stab yourself -- OUCH!!!) and push that black thing back over the end of the pin.

This is the product pinned to my shirt.

To change the batteries in your Best Blinkers ''Happy Birthay'' Flashing LED Pin, unscrew the two halves until they come apart.

Remove the two CR927 button cells from the bottom half of the light, and dispose of or recycle them as you see fit.

Place two new CR927 button cells in; orienting them so the flat (+) side is downward. Try to put that first cell in so it's in the center of the chamber, as best as you can get it. Use the tip of a pen to move the cell to the center if necessary. Lay the other cell on top of it, being sure the flat (+) side faces down. With both cells in there, screw the two halves of the light back together, and back off a bit once it springs to life.

If you love shiny, blinky things, you'll love the Best Blinkers ''Happy Birthay'' Flashing LED Pin.

The Best Blinkers ''Happy Birthay'' Flashing LED Pin is meant to be used as a blinking novelty item, not as a flashlight meant to be carried around, thrashed, trashed, and abused, so I won't try to drown it in the toliet tank, bash it against a steel rod or against the concrete floor of a patio, let my housemate's citty kats

go to the litterbox on it, run over it with a 450lb Celebrity motorised wheelchair, stomp on it, use a medium ball peen hammer in order to bash it open to check it for candiosity, fire it from the cannoñata, drop it down the top of Mt. Erupto (I guess I've been watching the TV program "Viva Piñata" too much again

(yes, I watched four episodes of this program just this last Saturday!!!) - candiosity is usually checked with a laser-type device on a platform with a large readout (located at Piñata Central), with a handheld wand that Langston Lickatoad uses, or with a pack-of-cards-sized device that Fergy Fudgehog uses; the cannoñata (also located at Piñata Central) is only used to shoot piñatas to piñata parties away from picturesque Piñata Island, and Mt. Erupto is an active volcano on Piñata Island), send it to the Daystrom Institute for additional analysis, or perform other indecencies on it that a flashlight might have to have performed on it. So this section of the web page will be ***SIGNIFICANTLY*** more bare than this section of the web page on a page about a flashlight.

The Best Blinkers ''Happy Birthay'' Flashing LED Pin produces a wide, 180 degree swath of light. Although it isn't meant to be used as a flashlight, you could use it as a rather dim (short range) one if the need comes up - and the blinking effect does not piss you off, that is.

Photograph of the product; showing the LEDs on.

Spectrographic analysis of the red LEDs in this flasher.

Spectrographic analysis of the red LEDs in this flasher; spectrometer's response narrowed to a band between 620nm and 640nm to pinpoint peak wavelength, which is 632.488nm.

Spectrographic analysis of the yellow LEDs in this flasher.
That hump in the red is from the red LEDs and could not be quashed.

Spectrographic analysis of the yellow LEDs in this flasher; spectrometer's response narrowed to a band between 585nm and 605nm to pinpoint peak wavelength, which is 593.004nm.

USB2000 spectrometer graciously donated by P.L.

Brief video on YouTube showing the ''Happy Birthday'' Flashing Pin in action.

That music you hear is a piano solo of The Birthday Song.

Although this product isn't sound-sensitive and the music may be ignored or even muted if it torques you off, The Birthday Song is rather appropriate for this product.

This video is approximately 3.6006457634 megabytes (3,933,853 bytes) in length; dial-up users please be aware.
It will take no less than eighteen minutes to load at 48.0Kbps.

TEST NOTES:
Test unit was purchased at the Party City store in Federal Way WA. USA on 01-19-13 {or "19 Jan. 2013", or even "Jan. 19, Twenty Stick-Boobs" if you prefer}.

UPDATE: 00-00-00

PROS:
Neato "blinky shiny" thing

NEUTRAL:

CONS:
Batteries it uses could be expen$ive or difficult to locate in a pinch
Appears unusually easy to crossthread battery compartment lid
Not all that water-resistant

Unknown

Novelty LED blinker

Chip-type LED

9 (7 red, 2 yellow)

Very wide flood

Twist case halves on/off

Metal & plastic

Plastic; LEDs protected by transparent epoxy dome

2x CR927 lithium button cells

Unknown/unable to measure

Light splatter-resistant at maximum

SNIETY MIKOLAJ ZA POMOCA SZCZOTECZKI DO ZEBÓW, KTÓRY SPADL W TOALECIE, NIE!

2x CR927 lithium button cells

41mm T x 30mm W x 18.3mm D (incl. pin)

5.30g (0.190 oz.) incl. batteries

China

Unknown

Best Blinkers ''Happy Birthay'' Flashing LED Pin *

Do you manufacture or sell an LED flashlight, task light, utility light, or module of some kind? Want to see it tested by a real person, under real working conditions? Do you then want to see how your light did? If you have a sample available for this type of real-world, real-time testing, please contact me at ledmuseum@gmail.com.

Please visit this web page for contact information.

Unsolicited flashlights, LEDs, and other products appearing in the mail are welcome, and it will automatically be assumed that you sent it in order to have it tested and evaluated for this site.
Be sure to include contact info or your company website's URL so visitors here will know where to purchase your product.







This page is a frame from a website.
If you arrived on this page through an outside link,you can get the "full meal deal" by clicking here.