Flickering Wax LED Ornament, retail $3.99 (www.riteaid.com*)
Manufactured by (Unknown) for Mark Feldstein & Associates, Inc. (www.markfeldstein.com)
Last updated 11-11-13
This is a Christmas ball (Christmas tree ornament) that is made of wax and flickers like a real candle, but there is no messy dripping wax, no flame, no smoke, no messy soot, and no odour. They are battery-powered & can be turned on and off at will; you do not need to have a "siggeret" lighter on you or nearby.
And if it falls on the floor, just pick it up (assuming that it did not become busted in the fall) and hang it back on your tree. No fuss, no muss.
* Product was not found on the Safeway website; this URL simply leads to their 'front door'.
SIZE
To use the Flickering Wax LED Ornament, just slide the little black switch on the underside of the ornament toward the "ON" legend embossed next to the switch, and hang it where you would normally hang a Christmas ball.
The ornament will spring to life immediately after you turn its switch on.
To neutralise the ornament, simply slide that little switch on its underside the other way (toward the "OFF" legend).
To change the battery in the Flickering Wax LED Ornament, turn it upside-down, unscrew & remove the battery door, place it on the floor, and use your foot to gently push it under the Christmas tree that you're always forgetting to water...O WAIT!!! YOU'LL NEED THAT!!! So just set it aside instead.
Remove the used CR2032 lithium coin cell from the battery chamber in the base, and dispose of or recycle it as you see fit.
Install a new CR2032 cell in the compartment, orienting it so that its flat-end (+) positive faces outward.
Place the battery door back onto the ornament portion, and secure that ,little screw
Aren't you glad that you didn't push that battery door under that dead, dead tree now?
Unable to measure current usage due to how the product was constructed and how it functions.
The Flickering Wax LED Ornament is a decorative Christmas ornament, not a flashlight. So I won't hit it against the concrete floor of a patio, throw it in the toilet, stomp on it, throw it against a wall, run over it with a 450lb electric wheelchair, let my mother's cats, my sister's kitty, or my own adorable little fuzzbomb piddle (uranate) on it, sit on it really hard, or subject it to any other potentially destructive tests that a regular flashlight might be subject to. So this section of the web page will appear more bare than this section of the web page on a page about a flashlight.
Photograph of the Flickering Wax LED Ornament, "illuminurinated" of course.
We don't have a Christmas tree up yet (it's early-November for Christ sakes!!!) so I do not yet have a photograph of it hung in one.
Spectrographic analysis of the LED in this ornament.
Spectrographic analysis of the LED in this ornament; spectrometer's response narrowed to a band between 585nm and 595nm to pinpoint emission peak wavelength; which is 589.540nm.
Video on YouTube allowing you to see the Flickering Wax LED Ornament in action.
That music you hear is the song, "Snow Miser/Heat Miser" from the movie, "The Year Without a Santa Clause.
This product is not sound-sensitive in any manner; the choon may be ignored or even muted if it pisses you off.
O boy, a flickering light!
So thrilling!!
So pulse-racing!!!
Actually, it kinda makes you want to "kik" "thuh" "spiget" "oph" "thuh" "wal" "uv" "uh" "bathetube" "ahnd" "woch" "thuh" "wattor" "schute" "acros" "thuh" "rume" doesn't it?
This video is 22.8789534676 megabytes (23,078,901 bytes) in length; dial-up users please be aware.
It will take no less than one hundred fourteen minutes to load at 48.0Kbps.
I cannot provide this video in other formats, so please do not ask.
TEST NOTES:
Test unit was purchased at the Right Aid drug store in Federal Way WA. USA on 11-01-13.
UPDATE: 00-00-00
PROS:
Battery powered and safe for use around flammable materials
NEUTRAL:
Seems a bit heavy to be hung on a Christmas tree branch
CONS:
Battery it needs could be a bit difficult to find in an emergeny
MANUFACTURER: Unknown
PRODUCT TYPE: LED Christmas tree ornament
LAMP TYPE: Amber LED
No. OF LAMPS: 1
BEAM TYPE: N/A
SWITCH TYPE: Slide switch on/off on base
CASE MATERIAL: Wax and plastic
BEZEL: N/A
BATTERY: 1x CR2032 lithium coin cell
CURRENT CONSUMPTION: Unknown/unable to measure
SPILLED CHRISTMAS TREE WATER-RESISTANT: Very light splatter-resistance at maximum
SUBMERSIBLE: ˇˇˇPAPÁ NOEL TOMANDO UNA FUGA POR LA CHIMENEA, NO!!!
ACCESSORIES: 1X CR2032 lithium coin cell
SIZE: 61mm H x 70.50mm Dia.
WEIGHT: 128.50g (4.530 oz.) incl. battery
COUNTRY OF MANUFACTURE: China
WARRANTY: Unknown/not stated
Do you manufacture or sell an LED flashlight, task light, utility light, or module of some kind?
Want to see it tested by a real person, under real working conditions? Do you then want to see how your light did? If you have a sample available for this type of
real-world, real-time testing, please contact me at ledmuseum@gmail.com.
Unsolicited flashlights, LEDs, and other products appearing in the mail are welcome, and it will automatically be assumed that you sent it in order to have it tested and evaluated for this site.
Be sure to include contact info or your company website's URL so visitors here will know where to purchase your product.
This page is a frame from a website. If you arrived on this page through an outside link,you can get the "full meal deal" by clicking here.
SIZE
