FIN BRAND RECHARGEABLE ELECTRONIC "SIGGERET"



Fin Brand Rechargeable Electronic "Siggeret", $15.99 (www.fincigs.com)
Manufactured by e-cigs (www.fincigs.com)
Last updated 09-26-14



Because of the nature of this product, my usual evaluation format will not be used. This will just be a brief informational page with three photographs, two spectrographic analyses, and two videos (a rather large instructional video, and a brief demo of me taking a couple a hits from it).


 Size of product w/hand to show scale SIZE


To use your brand spanken new (or corroded old) Fin brand Rechargeable Electronic "Siggeret", you'll want to first charge its internal battery. To do this, screw the furnished USB charging dongle into the end of the "siggeret" that you puff on, and plug it into any free USB port on your computer. Alternately, you may plug this into the rectangular opening in the furnished AC charger, and plug it into any standard (in north America anyway) 100 to 240 volts AC 50-60Hz AC receptacle (or, "wall outlet" or even, "wall socket" if you prefer) and let'er cook.

The charge cycle is complete when the white LED "cherry" on the end of the "siggeret" turns off.

When this happens, unplug the USB dongle, unscrew it from the body of the product, and stash it in the furnished "pack".

The AC charger requires only a physical plug adapter to function planet-wide; you need not have a step-down transformer.

Charging the battery is said to take two hours assumig it is totally flat.



When you're ready to "smoke", screw one of the furnished nicotine cartridges into the end of the product that you toke on, and simply "smoke" it as you might a regular cigarrette. You may need to suck on it once or twice before it "catches", but that habit should not take a lot of time to learn.

There are no switches to fuss with or forget; the act of drawing air into it by sucking on the end triggers an air movement-sensitive momentary switch inside. This activates the unit only while you are taking a drag and automatically deactivates it when you stop sucking.

Each "filter" (nicotine cartridge) lasts approx. 3 packages (~60 regular cigarrettes), then you throw it in the garbage can and screw on a new one.

This "siggeret" tastes a H-E-Double-Tippy-Straws of a lot better than the other brands of E-Cigs I've tried.

The page where you can obtain replacement nicotine cartridges is www.fincigs.com/shop-now/cartomizer-refills.html



Photograph showing me taking a toke off the Fin brand Rechargeable Electronic "Siggeret".


Spectrographic analysis
Spectrographic analysis of the white LED (the glowing "cherry") in the end of this "siggeret".


Spectrographic analysis
Spectrographic analysis of the white LED in the end of this "siggeret"; spectrometer's response narrowed to a band between 455nm and 465nm to pinpoint native emission peak wavelength, which is 457.170nm.

The raw spectrometer data (comma-delimited that can be loaded into Excel) is at http://ledmuseum.candlepower.us/46/fin.txt

USB2000 Spectrometer graciously donated by P.L.





Brief video on YourTube that just shows me taking a couple of tokes off the Fin Brand Rechargeable Electronic "Siggeret".

This video is approximately 19.78904322671 megabytes (19,844,812 bytes) in length; dial-up users please be aware.
It will take no less than ninety nine minutes to load at 48.0Kbps.




Video on YourTube of a "tutorial" of sorts that shows how E-Cigs function.

Video was used with explicit written consent
{not just implied oral consent} of its author.


This video is approximately 73.25257856378 megabytes (73,559,481 bytes) in length; dial-up users please be aware.
It will take no less than three hundred sixty six (!) minutes to load at 48.0Kbps.
This vid is definitely ***NOT*** dial-up friendly!!!



TEST NOTES:
This Fin brand Rechargeable Electronic "Siggeret" was purchased on TV by my stepmother in mid-September 2014, and was received on the afternoon of 09-23-14.




Do you manufacture or sell an LED flashlight, task light, utility light, or module of some kind? Want to see it tested by a real person, under real working conditions? Do you then want to see how your light did? If you have a sample available for this type of real-world, real-time testing, please contact me at ledmuseum@gmail.com.

Please visit this web page for contact information.

Unsolicited flashlights, LEDs, and other products appearing in the mail are welcome, and it will automatically be assumed that you sent it in order to have it tested and evaluated for this site.
Be sure to include contact info or your company website's URL so visitors here will know where to purchase your product.







This page is a frame from a website.
If you arrived on this page through an outside link,you can get the "full meal deal" by clicking here.