BLUE LED BADGE

Blue LED Badge, retail $14.95
Manufactured by (Unknown)
Last updated 01-13-08




Thuh kompenie thaat maks thuh LED Name Card kant spel...O WAIT!!! They spelled all of the words in the name of this product "kerrektlee".
The Blue LED Badge was purchased on Ebay, while I was looking for another product.

The Blue LED Badge is remarkably easy to use; just pop two of the four included batteries in it, and program it via the three buttons on its back. It is comparable in ease to entering your initials after reaching a high score on a coin-op arcade video game like they had in the 1980s and 1990s - and probably the early-2000s too; though I have not played one of the coin-op arcade video games from this decade so I cannot confirm how high score monitoring is performed on modern equipment.

Yes, it really is that easy.

It scrolls your message in bright blue LED lights on its front surface; you can have up to six messages (512 characters & spaces for the first message, 256 characters & spaces for messages 2 through 6).

The name on the front of the package is "DIGIGR8 LED NAME CARD".


SIZE



To use the Blue LED Badge, first install two of the four included the batteries into it (see below), and then you'll be ready to rock.

On the back of the unit, there are three slim pushbutton switches: "ENTER/ON/OFF", "PAGE UP" (P-U), and "PAGE DOWN" (P-D). These switches have a noticeable clicking sound and a firm tactile sensation (a "click" sensation you can feel) when they are actuated, so there is no mistake when the switches are pressed.

Press the "ENTER/ON/OFF" button to turn the product on; press it again to turn the product off.

When the badge is on (displaying a message), pressing the P-U or P-D buttons selects switch display info (message you want to display; 1-6 - "SWITCH"), input text mode ("INPUT"), display scrolling speed ("SPEED"), or LED brightness control ("LUM").

The first option you'll want to select is "SWITCH" mode to select which block of memory you want to use to store a message. When "SWITCH" is scrolling on the unit's display, press the "ENTER/ON/OFF" button, and then the "P-U" or "P-D" buttons to select page 1, 2, 3, 4, 5, or 6. Press the "ENTER/ON/OFF" button to lock in your choise.

When the badge is on (displaying a message), press the "P-U" or "P-D" buttons to select input text mode ("INPUT"); press the "ENTER/ON/OFF" button, and you'll be in text entry mode.

Change the letter on the right side of the display using the "P-U" and "P-D" buttons; use the "ENTER/ON/OFF" button to lock that character into the unit's memory and move to the next. To add a space between words, simply press the "ENTER/ON/OFF" button. When you have a word with double letters (like the name "Jeff"), after entering the first of the doubled letters (the first "f" in this case), change the second to an "e" or a "g" and then select "f" and continue as normal. When you are finished entering your message, either press and hold the "P-D" button for three seconds or wait (do not press any buttons) for ~10 seconds. The message you entered will then automatically scroll from right to left on the unit's LED display.

Uppercase and lowercase letters, the characters above the number keys (!, @, #, $, %, ^, &, *, (, and )), the numerals 0-9, and various punctuation characters are all available.


In this example, I am inputting the phrase "PISS OFF, PISS ANT!" into the product.

To select scrolling speed, turn the unit on, press the "P-U" or "P-D" buttons until "SPEED" is scrolling on the unit's display, press the "ENTER/ON/OFF" button, and then the "P-U" or "P-D" buttons to select speeds 1, 2, 3, 4, 5, 6, 7, 8, or 9. Press the "ENTER/ON/OFF" button to lock in your choise.
1 is the slowest, 9 is the fastest.

To select brightness, turn the unit on, press the "P-U" or "P-D" buttons until "LUM" is scrolling on the unit's display, press the "ENTER/ON/OFF" button, and then the "P-U" or "P-D" buttons to select brightnesses 1, 2, 3, 4, 5, 6, 7, 8, or 9. Press the "ENTER/ON/OFF" button to lock in your choise.
1 is the dimmest, and 9 is the brightest.

Use the included magnet or the included safety pin to affix the Blue LED Badge to a shirt, apron, jacket, or other fabric as you wish.



To remove the batteries, turn the unit upside-down so the back surface faces up. Turn the unit so the door that reads "OPEN" is on the lower left. Use an instrument like a knife blade to slide the door out. When it does come out, remove and dispose of or recycle the used-up old CR2016 cells.

Insert two new CR2016 cells into the opening of this door, orienting them so the flat sides (+) positives faces upward.

With the unit still oriented so the LEDs face down, insert (if necessary) and push in on the door until it is flush with the rest of the unit.



This is a digital scrolling badge, not a flashlight. So I won't try to whack it against a steel rod or against the concrete floor of a patio, stomp on it, try to drown it in a commode, run over it, or inflict other punishments upon it that I might inflict upon a flashlight. So this section of its web page will be rather bare, when compared to this section of the web page on a page about a flashlight.

The Blue LED Badge has 21 columns of 7 bright blue LEDs, for 147 LEDs total.

One of the first things I do when I test a programmable message thing is to see if there's an onboard censor, and there isn't. I input "{vulgar term for a man or woman who acts as a penis vaccume}! {vulgar term for male urinator/inseminator - rhymes with stick} {vulgar slang term for homosexual male - rhymes with the last name of AFV host Bob Sagget; or an archaic term that used to describe a bundle of sticks}" into the Blue LED Badge, and it happily spouted off the stream of obcenities.
I soon changed it back to "THANK YOU FOR VISITING WWW.LEDMUSEUM.ORG!!!" just so I wouldn't forget.

So if you have garbage mouth, potty mouth, toilet tongue, sewer mouth, sewer chute, etc. you can input dirty language into the Blue LED Badge and have it spew forth with the obcenities when the product is subsequently used.


Photograph of the Blue LED Badge affixed to a shirt, as it might normally be used.

Because this device has a fairly strong magnet, you should excersize exteme caution when you use the badge near a heart pacemaker if you have a pacemaker implanted in your chest.

I found the unit remarkably easy to use, considering there is no computer interface or software - all of the product's functions are controlled via three buttons on the back.

The instructional materials indicate the presence of an AC adapter input on the left side of the product, but this does not exist on the actual unit.

This evaluation resemble the ones I made for the Green LED Badge and the Red LED Badge?
Thought so. It's because I used them as templates for this one.




I tried to take a photograph of the Blue LED Badge while a message was scrolling, but the scrolling speed was fast enough and the camera's shutter speed was slow enough that the photograph did not come out well at all.


Spectrographic plot
Spectrographic analysis of the LEDs in this badge.
Ocean Optics USB2000 Spectrometer on loan from WWW.TWO-CUBED.COM.


WMP movie (.avi extension) showing the Blue LED Badge in action.
This is ~2.6 megabytes (2,911,060 bytes) in length; dial-up users please be aware.
It will take no less than ten minutes to load at 48.0Kbps.
I cannot provide it in other formats, so please do not ask.

That sound you might hear is Star Trek: DS9 playing on the boob tube.



TEST NOTES:
Sample of the Blue LED Badge was purchased on Ebay on 01-05-07 and was received on 01-12-07.

Product was made in China. A product's country of origin really does matter to some people, which is why I published it on this web page.


UPDATE: 02-06-07
I input the message "HAPPY BIRTHDAY ANGIE!!!" and attached it to my shirt this evening, as it is my stepsister's birthday today.


UPDATE: 12-05-07
I input the message "Time for your meds & vites, Angie! :-)" so I can use it every morning instead of the Red LED Badge I've been using for the last several months.


UPDATE: 01-13-08
Product has inexplicably failed; yes, I tried new batteries in it, and even metered them to ensure that a dead one wasn't inadvertantly installed with a good one.
Therefore, that dreadful "" icon will appear next to its listings on this website until or if I am able to obtain a replacement.


UPDATE: 01-13-08
No, you aren't seeing things.
Yes, a same-day update.
I was able to find a replacement on Ebay; I promptly purchased it.
Therefore, that dreadful "" icon won't appear next to its listings on this website for too long.


PROS:
No onboard censor
LEDs are bright enough to see in room light - they're really bright, actually
Enough space to input large sized messages
Batteries it needs are a bit odd, but not unreasonably so. Should be easy to find
Easy to program even though there is no software interface



CONS:
No onboard censor


    MANUFACTURER: Unknown
    PRODUCT TYPE: Magnetic scrolling LED badge
    LAMP TYPE: Small blue LED
    No. OF LAMPS: 147
    BEAM TYPE: N/A
    SWITCH TYPE: Small rubber pushbutton on/off, character up/down
    CASE MATERIAL: Plastic
    BEZEL: Plastic
    BATTERY: 2xCR2016 lithium coin cells
    CURRENT CONSUMPTION: Unknown/unable to measure
    WATER RESISTANT: Light sprinkle-resistance at maximum
    SUBMERSIBLE: No
    ACCESSORIES: 4xCR2016 cells, thin bar magnet
    SIZE: 3.15"L x 1.60"W x 0.260"D
    WEIGHT: ~1.10oz.
    WARRANTY: Unknown/not stated

    PRODUCT RATING:

    Star Rating





Blue LED Badge *






Do you manufacture or sell an LED flashlight, task light, utility light, or module of some kind? Want to see it tested by a real person, under real working conditions? Do you then want to see how your light did? If you have a sample available for this type of real-world, real-time testing, please contact me at ledmuseum@gmail.com.

Please visit this web page for contact information.

Unsolicited flashlights, LEDs, and other products appearing in the mail are welcome, and it will automatically be assumed that you sent it in order to have it tested and evaluated for this site.
Be sure to include contact info or your company website's URL so visitors here will know where to purchase your product.


WHITE 5500-6500K InGaN+phosphor 
ULTRAVIOLET 370-390nm GaN 
BLUE 430nm GaN+SiC
BLUE 450 and 473nm InGaN
BLUE Silicon Carbide
TURQUOISE 495-505nm InGaN
GREEN 525nm InGaN 
YELLOW-GREEN 555-575mn GaAsP & related
YELLOW 585-595nm
AMBER 595-605nm
ORANGE 605-620nm
ORANGISH-RED 620-635nm
RED 640-700nm
INFRARED 700-1300nm
True RGB Full Color LED
Spider (Pirrahna) LEDs
SMD LEDs
True violet (400-418nm) LEDs
Agilent Barracuda & Prometheus LEDs
Oddball & Miscellaneous LEDs
Programmable RGB LED modules / fixtures
Where to buy these LEDs 
Links to other LED-related websites
The World's First Virtual LED Museum
Legal horse puckey, etc.
RETURN TO OPENING/MAIN PAGE
LEDSaurus (on-site LED Mini Mart)



This page is a frame from a website.
If you arrived on this page through an outside link,you can get the "full meal deal" by clicking here.